Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 34)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

• Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionality

supported).

• Use 802.1w to specify that the switch transmits RST BPDUs rather than MST BPDUs

(IEEE 802.1w functionality supported).

no spanning-tree forceversion

This command sets the Force Protocol Version parameter to the default value.

Format no spanning-tree forceversion

Mode

spanning-tree forward-time

This command sets the Bridge Forward Delay parameter to a new value for the Common and

Internal Spanning Tree. The forward-time value is in seconds within a range of 4–30, with the

value being greater than or equal to “(Bridge Max Age / 2) + 1”.

Default

Format spanning-tree forward-time

<4-30>

Mode

no spanning-tree forward-time

This command sets the Bridge Forward Delay parameter for the Common and Internal

Spanning

Tree to the default value.

Format no spanning-tree forward-time

Mode

spanning-tree guard

This command selects whether loop guard or root guard is enabled on an interface. If neither

is enabled, the port operates in accordance with the multiple spanning tree protocol.

Default

Format spanning-tree guard { none | root | loop }

Mode

no spanning-tree guard

This command disables loop guard or root guard on the interface.

Format no spanning-tree guard

Mode

Global Config

none

Interface Config

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 34

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+