Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 314)

100

101

Routing Commands

314

ProSafe M4100 and M7100 Managed Switches

no distribute-list out

This command is used to specify the access list to filter routes received from the source

protocol.

Format no distribute-list <1-199> out {ospf | static | connected}

Mode

ip rip authentication

This command sets the RIP Version 2 Authentication Type and Key for the specified

interface. The value of <type> is either none, simple, or encrypt. The value for

authentication key [key] must be 16 bytes or less. The [key] is composed of standard

displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of

<type> is encrypt, a keyid in the range of 0 and 255 must be specified. Unauthenticated

interfaces do not need an authentication key or authentication key ID.

Default

Format ip rip authentication {none | {simple <key>} | {encrypt <key>

<keyid>}}

Mode

no ip rip authentication

This command sets the default RIP Version 2 Authentication Type for an interface.

Format no ip rip authentication

Mode

ip rip receive version

This command configures the interface to allow RIP control packets of the specified

version(s) to be received.

The value for <mode> is one of: rip1 to receive only RIP version 1 formatted packets, rip2

for RIP version 2, both to receive packets from either format, or none to not allow any RIP

control packets to be received.

Default

Format ip rip receive version {rip1 | rip2 | both | none}

Mode

Router RIP Config

none

Interface Config

both

Interface Config

1 2 ... 309 310 311 312 313 314 315 316 317 318 319 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 314

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+