Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 276)

100

101

Routing Commands

276

ProSafe M4100 and M7100 Managed Switches

no distance ospf

This command sets the default route preference value of OSPF routes in the router. The type

of OSPF can be intra, inter

, or external. All the external type routes are given the same

preference value.

Format no distance ospf {intra-area | inter-area | external}

Mode

distribute-list out (OSPF)

Use this command to specify the access list to filter routes received from the source protocol.

Format distribute-list <1-199> out {rip | static | connected}

Mode

no distribute-list out

Use this command to specify the access list to filter routes received from the source protocol.

Format no distribute-list <1-199> out {rip | static | connected}

Mode

exit-overflow-interval (OSPF)

This command configures the exit overflow interval for OSPF. It describes the number of

seconds after entering overflow state that a router will wait before attempting to leave the

overflow state. This allows the router to again originate non-default AS-external-LSAs. When

set to 0, the router will not leave overflow state until restarted. The range for seconds is

0–2,147,483,647 seconds.

Default

Format exit-overflow-interval <seconds>

Mode

no exit-overflow-interval

This command configures the default exit overflow interval for OSPF.

Format no exit-overflow-interval

Mode

Format distance ospf {intra-area <1-255> | inter-area <1-255> | external

<1-255>}

Mode

Router OSPF Config

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 276

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+