Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 274)

100

101

Routing Commands

274

ProSafe M4100 and M7100 Managed Switches

clear ip ospf configuration

Use this command to reset the OSPF configuration to factory defaults.

Format clear ip ospf configuration

Mode

clear ip ospf counters

Use this command to reset global and interface statistics.

Format clear ip ospf counters

Mode

clear ip ospf neighbor

Use this command to drop the adjacency with all OSPF neighbors. On each neighbor’s

interface, send a one way hello. Adjacencies might then be reestablished. To drop all

adjacencies with a specific router ID, specify the neighbor’s Router ID using the optional

parameter [neighbor-id].

Format clear ip ospf neighbor [neighbor-id]

Mode

clear ip ospf neighbor interface

To drop adjacency with all neighbors on a specific interface, use the optional parameter

[slot/port]. To drop adjacency with a specific router ID on a specific interface, use the optional

parameter [neighbor-id].

Format clear ip ospf neighbor interface [slot/port] [neighbor-id]

Mode

clear ip ospf redistribution

Use this command to flush all self-originated external LSAs. Reapply the redistribution

configuration and reoriginate prefixes as necessary.

Format clear ip ospf redistribution

Mode

clear ip ospf stub-router

OSPF can enter stub router mode due to resource exhaustion (too many LSAs, too many

routes, memory allocation failures, and so on). When this happens, the user can get out of

this mode by issuing the command after the cause of the overload has been resolved.

Privileged EXEC

1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 274

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+