Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 270)

100

101

Routing Commands

270

ProSafe M4100 and M7100 Managed Switches

composed of standard displayable, non-control keystrokes from a Standard 101/102-key

keyboard. The authentication key must be 8 bytes or less if the authentication type is simple.

If the type is encrypt, the key might be up to 16 bytes. Unauthenticated interfaces do not need

an authentication key. If the type is encrypt, a key id in the range of 0 and 255 must be

specified. The default value for authentication type is none. Neither the default password key

nor the default key id are configured.

Default

Format area <areaid> virtual-link <neighbor> authentication {none | {simple

<key>} | {encrypt <key> <keyid>}}

Mode

no area virtual-link authentication

This command configures the default authentication type for the OSPF virtual interface

identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of

the neighbor

Format no area <areaid> virtual-link <neighbor> authentication

Mode

area virtual-link dead-interval (OSPF)

This command configures the dead interval for the OSPF virtual interface on the virtual

interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the

Router ID of the neighbor. The range for seconds is 1–65,535.

Default

Format area <areaid> virtual-link <neighbor> dead-interval <seconds>

Mode

no area virtual-link dead-interval

This command configures the default dead interval for the OSPF virtual interface on the

virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is

the Router ID of the neighbor

Format no area <areaid> virtual-link <neighbor> dead-interval

Mode

none

Router OSPF Config

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 270

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+