Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 253)

100

101

Routing Commands

253

ProSafe M4100 and M7100 Managed Switches

decrement) for each downed interface. The default priority decrement is changed using the

<priority> argument. The default priority of the virtual router is 100, and the default

decrement priority is 10. By default, no interface are tracked. If you specify just the interface

to be tracked, without giving the optional priority, the default priority will be set. The default

priority decrement is 10.

Default

Format ip vrrp <vrid> track interface <slot/port> [decrement <priority>]

Mode

no ip vrrp track interface

Use this command to remove the interface from the tracked list or to restore the priority

decrement to its default.

Format no ip vrrp <vrid> track interface <slot/port> [decrement]

Mode

ip vrrp track ip route

Use this command to track the route reachability. When the tracked route is deleted, the

priority of the VRRP router will be decremented by the value specified in the <priority>

argument. When the tracked route is added, the priority will be incremented by the same.

A VRRP configured interface can track more than one route. When a tracked route goes

down, then the priority of the router will be decreased by 10 (the default priority decrement)

for each downed route. By default no routes are tracked. If you specify just the route to be

tracked, without giving the optional priority

, the default priority will be set. The default priority

decrement is 10. The default priority decrement is changed using the <priority> argument.

Default

Format ip vrrp <vrid> track ip route <ip-address/prefix-length> [decrement

<priority>]

Mode

no ip vrrp track ip route

Use this command to remove the route from the tracked list or to restore the priority

decrement to its default. When removing a tracked IP route from the tracked list, the priority

should be incremented by the decrement value if the route is not reachable.

Format no ip vrrp <vrid> track ip route <ip-address/prefix-length>

[decrement]

Mode

priority: 10

Interface Config

priority: 10

Interface Config

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 253

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+