Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 137)

100

101

Switching Commands

137

ProSafe M4100 and M7100 Managed Switches

0/1 Yes No

0/2 No Yes

0/3 No Yes

0/4 No No

0/6 No No

show ip dhcp snooping binding

Use this command to display the DHCP Snooping binding entries. To restrict the output, use

the following options:

• Dynamic: Restrict the output based on DCHP snooping.

• Interface: Restrict the output based on a specific interface.

• Static: Restrict the output based on static entries.

• VLAN: Restrict the output based on VLAN.

Format show ip dhcp snooping binding [{static/dynamic}] [interface

slot/port] [vlan id]

Mode

• Privileged EXEC

• User EXEC

Example: The following shows example CLI display output for the command.

(switch) #show ip dhcp snooping binding

Total number of bindings: 2

MAC Address IP Address VLAN Interface Type Lease (Secs)

------------------ ------------ ---- --------- ---- -------------

00:02:B3:06:60:80 210.1.1.3 10 0/1 86400

00:0F:FE:00:13:04 210.1.1.4 10 0/1 86400

Term Definition

MAC Address

Displays the MAC address for the binding that was added. The MAC address is the key

to the binding database.

IP Address

Displays the valid IP address for the binding rule.

VLAN

The VLAN for the binding rule.

Interface

The interface to add a binding into the DHCP snooping interface.

Type

Binding type; statically configured from the CLI or dynamically learned.

Lease (sec)

The remaining lease time for the entry.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 137

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+