Netgear GS728TP User Manual download pdf (Page 513)

100

101

Configuration Examples

513

ProSafe M5300 Switch

ports, you must add a new permit rule with the desired match criteria and bind the rule to

interfaces 6, 7, and 8.

Standard IP ACL Example Configuration

The following example shows how to create an IP-based ACL that prevents any IP traffic

from the Finance department from being allowed on the ports that are associated with other

departments. Traffic from the Finance department is identified by each packet’s network IP

address.

1. From the IP ACL screen, create a new IP ACL with an IP ACL ID of 1 (See IP ACL on

page 442).

2. From the IP Rules screen, create a rule for IP ACL 1 with the following settings:

• Rule ID: 1

• Action: Deny

• Assign Queue ID: 0 (optional: 0 is the default value)

• Match Every: False

• Source IP Address: 192.168.187.0

• Source IP Mask: 255.255.255.0

For additional information about IP ACL rules, see IP Rules on page 443.

3. Click ADD.

4. From the IP Rules screen, create a second rule for IP ACL 1 with the following settings:

• Rule ID: 2

• Action: Permit

• Match Every: True

5. Click ADD.

6. From the IP Binding Configuration page, assign ACL ID 1 to the interface gigabit ports 2, 3,

and 4, and assign a sequence number of 1 (See

IP Binding Configuration on page 453).

By default, this IP ACL is bound on the inbound direction, so it examines traffic as it

enters the switch.

7. Click APPLY.

8. Use the IP Binding Table screen to view the interfaces and IP ACL binding information (See

MAC Binding Table on page 441).

The IP ACL in this example matches all packets with the source IP address and subnet mask

of the Finance department's network and deny it on the Ethernet interfaces 2, 3, and 4 of the

switch. The second rule permits all non-Finance traffic on the ports. The second rule is

required because there is an explicit deny all rule as the lowest priority rule.

1 2 ... 508 509 510 511 512 513 514 515 516 517 518 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 513

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP