Netgear GS728TP User Manual Page 296

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 295
Routing
296
ProSafe M5300 Switch
IGMP
The Internet Group Management Protocol (IGMP) is used by IPv4 systems (hosts, L3
switches, and routers) to report their IP multicast group memberships to any neighboring
multicast routers. The ProSafe managed switch performs the multicast router role of the
IGMP protocol, which means it collects the membership information needed by the active
multicast routing protocol.
The ProSafe managed switch supports IGMP Version 3. Version 3 adds support for source
filtering, which is the ability for a system to report interest in receiving packets only from
specific source addresses, as required to support Source-Specific Multicast (SSM), or from
all but specific source addresses, sent to a particular multicast address. Version 3 is designed
to be interoperable with Versions 1 and 2.
From the IGMP link, you can access the following pages:
IGMP Global Configuration on page 296
IGMP Routing Interface Configuration on page 297
IGMP Routing Interface Statistics on page 298
IGMP Groups on page 299
IGMP Membership on page 300
IGMP Proxy Interface Configuration on page 301
IGMP Proxy Interface Statistics on page 302
IGMP Proxy Membership on page 303
IGMP Global Configuration
To display the IGMP Global Configuration page, click Routing Multicast IGMP Global
Configuration.
To configure the administrative mode of IGMP on the switch, select the desired option from
the Admin Mode field. The default is disable. If you change the mode, click APPLY to update
the switch with the change.
Page view 295
1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 529 530

Comments to this Manuals

No comments