Netgear GS728TP User Manual download pdf (Page 445)

100

101

Managing Device Security

445

ProSafe M5300 Switch

4. To update an IP ACL rule, select the check box associated with the rule, update the desired

fields, and then click APPLY. You cannot modify the Rule ID of an existing IP rule.

5. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

6. If you change any of the settings on the page, click APPLY to send the updated

configuration to the switch. Configuration changes take effect immediately.

IP Extended Rules

Use these screens to configure the rules for the IP Access Control Lists created using the IP

Access Control List Configuration screen. What is shown on this screen varies depending on

the current step in the rule configuration process.

Note: There is an implicit “deny all” rule at the end of an ACL list. This

means that if an ACL is applied to a packet and if none of the explicit

rules match, then the final implicit “deny all” rule applies and the

packet is dropped.

To display the IP extended Rules page, click Security

 ACL> Advanced  IP Extended

Rules.

To configure rules for an IP ACL:

1. To add an IP ACL rule, select the ACL ID to add the rule to, select the check box in the

Extended ACL Rule table, and click ADD. The page displays the extended ACL Rule

Configuration fields, as the following figure shows.

1 2 ... 440 441 442 443 444 445 446 447 448 449 450 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 445

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP