Netgear GS728TP User Manual download pdf (Page 53)

100

101

Configuring System Information

ProSafe M5300 Switch

DHCP Relay

If the switch is functioning as a Layer 3 device, the Layer 3 DHCP Relay Agent can relay

DHCP messages between DHCP clients and DHCP servers that are located in different IP

subnets.

To display the DHCP Relay page, click System > Services> DHCP Relay. A screen similar to

the following displays.

DHCP Relay Configuration

To configure the DHCP Relay information:

1. Use Maximum Hop Count to enter the maximum number of hops a client request can

take before being discarded. The range is (1 to 16). The default value is 4.

2. Use Admin Mode to select enable or disable radio button. When you select 'enable' DHCP

requests will be forwarded to the IP address you entered in the 'Server Address' field.

3. Use Minimum Wait Time to enter a Minimum Wait Time in seconds. This value will be

compared to the time stamp in the client's request packets, which should represent the time

since the client was powered up. Packets will only be forwarded when the time stamp

exceeds the minimum wait time. The range is (0 to 100).

4. Use Circuit ID Option Mode to enable or disable Circuit ID Option mode. If you select

'enable' Relay Agent options will be added to requests before they are forwarded to the

server and removed from replies before they are forwarded to clients.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 53

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP