Netgear GS728TP User Manual download pdf (Page 222)

100

101

Routing

222

ProSafe M5300 Switch

Static ARP Cache

To display the Static ARP Cache page, click Routing ARP Advanced  ARP Create.

ARP Static Configuration

Use this screen to add an entry to the Address Resolution Protocol table.

1. Use IP Address to enter the IP address you want to add. It must be the IP address of a

device on a subnet attached to one of the switch's existing routing interfaces.

2. Use MAC Address to specify the unicast MAC address of the device. Enter the address as

six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.

3. Click ADD to add a new static ARP entry to the switch.

4. Click DELETE to delete an existing static ARP entry from the switch.

5. Click APPLY to change the MAC Address mapping to the IP. Configuration changes take

effect immediately.

ARP Cache

Use this screen to show ARP entries in the ARP Cache.

Field Description

Port The associated Unit/Slot/Port of the connection

IP Address Displays the IP address. It must be the IP address of a device on a subnet

attached to one of the switch's existing routing interfaces.

MAC Address The unicast MAC address of the device. The address is six two-digit

hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.

Click REFRESH to show the latest IP information.

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 222

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP