Netgear GS728TP User Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
Configuring System Information
30
ProSafe M5300 Switch
Network Interface
From the Network Interface link, you can access the following pages:
IPv4 Network Configuration on page 30
IPv6 Network Interface Configuration on page 32
IPv6 Network Interface Neighbor Table on page 33
IPv4 Network Configuration
To display the IPv4 Network Configuration page, click System > Management > Network
Interface > IPv4 Network Configuration. A screen similar to the following displays.
The network interface is the logical interface used for in-band connectivity with the switch via
any of the switch's front panel ports. The configuration parameters associated with the
switch's network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed
To access the switch over a network you must first configure it with IP information (IP
address, subnet mask, and default gateway). You can configure the IP information using any
of the following:
BOOTP
DHCP
Terminal interface via the EIA-232 port
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 529 530

Comments to this Manuals

No comments