Netgear GS728TP User Manual download pdf (Page 87)

100

101

Configuring System Information

ProSafe M5300 Switch

SNMP

From SNMP link under the System tab, you can configure SNMP settings for SNMP V1/V2

and SNMPv3.

From the SNMP link, you can access the following pages:

• SNMPV1/V2 on page 87

• SNMP V3 User Configuration on page 92

SNMPV1/V2

The pages under the SNMPV1/V2 menu allow you to configure SNMP community

information, traps, and trap flags.

From the SNMP V1/V2 link, you can access the following pages:

• Community Configuration on page 87

• Trap Configuration on page 89

• Trap Flags on page 90

• Supported MIBs on page 91

Community Configuration

By default, two SNMP Communities exist:

• Private, with Read/Write privileges and status set to Enable.

• Public, with Read Only privileges and status set to Enable.

These are well-known communities. Use this page to change the defaults or to add other

communities. Only the communities that you define using this page will have access to the

switch using the SNMPv1 and SNMPv2c protocols. Only those communities with read/write

level access can be used to change the configuration using SNMP.

Use this page when you are using the SNMPv1 and SNMPv2c protocol. If you want to use

SNMP v3 you should use the User Accounts menu.

To display this page, click System  SNMP  SNMP V1/V2  Community Configuration. A

screen similar to the following displays.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 87

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP