Netgear GS728TP User Manual download pdf (Page 341)

100

101

Configuring Quality of Service

341

ProSafe M5300 Switch

To configure the switch using the DiffServ Wizard:

1. Use Traffic Type to define the DiffServ Class. Traffic type options: VOIP, HTTP, FTP,

Telnet, and Every.

2. Ports displays the ports which can be configured to support a DiffServ policy. The DiffServ

policy will be added to selected ports.

3. Use Enable Policing to add policing to the DiffServ Policy. The policing rate will be applied.

4. Committed Rate:

• When Policing is enabled, the committed rate will be applied to the policy and the

policing action is set to conform.

• When Policing is disabled, the committed rate is not applied and the policy is set to

markdscp.

5. Outbound Priority:

• When Policing is enabled, Outbound Priority defines the type of policing conform

action where: High sets action to markdscp ef, Med sets action to markdscp af31, and

Low sets action to send.

• When Policing is disabled, Outbound Priority defines the policy where: High sets

policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, Low set policy to mark

ipdscp be.

Basic

From the Basic link, you can access the following pages:

• DiffServ Configuration on page 341

DiffServ Configuration

Packets are filtered and processed based on defined criteria. The filtering criteria is defined

by a class. The processing is defined by a policy's attributes. Policy attributes may be defined

on a per-class instance basis, and it is these attributes that are applied when a match occurs.

The configuration process begins with defining one or more match criteria for a class. Then

one or more classes are added to a policy. Policies are then added to interfaces.

Packet processing begins by testing the match criteria for a packet. The 'all' class type option

defines that each match criteria within a class must evaluate to true for a packet to match that

class. The 'any' class type option defines that at least one match criteria must evaluate to true

for a packet to match that class. Classes are tested in the order in which they were added to

the policy. A policy is applied to a packet when a class match within that policy is found.

To display the DiffServ Configuration page, click QoS DiffServ  Basic  DiffServ

Configuration.

1 2 ... 336 337 338 339 340 341 342 343 344 345 346 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 341

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP