Netgear GS728TP User Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
Configuring System Information
91
ProSafe M5300 Switch
5. Use ACL to enable or disable activation of ACL traps by selecting the corresponding radio
button. The factory default is disabled.
6. Use PoE to enable or disable activation of PoE traps by selecting the corresponding radio
button. The factory default is enabled. Indicates whether PoE traps will be sent.
7. Use DVMRP to enable or disable activation of DVMRP traps by selecting the corresponding
radio button. The factory default is disabled.
8. Use PIM to enable or disable activation of spanning tree traps by selecting the
corresponding radio button. The factory default is disabled.
9. Use the options under the OSPFv2 Traps heading to enable or disable activation of specific
OSPF traps by selecting the corresponding radio button. The factory default is disabled. This
field can be configured only if the OSPF admin mode is enabled.
10. Use the options under the OSPFv3 Traps heading to enable or disable activation of specific
OSPFv3 traps by selecting the corresponding radio button. The factory default is disabled.
This field can be configured only if the OSPFv3 admin mode is enabled.
11. Click CANCEL to cancel the configuration on the screen. Resets the data on the screen to
the latest value of the switch.
12. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
Supported MIBs
This page displays all the MIBs supported by the switch. To access this page, click System
SNMP
SNMP V1/V2 Supported MIBs. The following screen shows some, but not all, of the
supported MIBs.
The following table describes the SNMP Supported MIBs Status fields.
Field Description
Name The RFC number if applicable and the name of the MIB.
Description The RFC title or MIB description.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 529 530

Comments to this Manuals

No comments