Netgear GS728TP User Manual Page 523

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 522
Configuration Examples
523
ProSafe M5300 Switch
MSTP Example Configuration
This example shows how to create an MSTP instance from the GSM7352Sv1 or
GSM7352Sv2 switch. The example network has three different ProSafe that serve different
locations in the network. In this example, ports 1/0/1-1/0/5 are connected to host stations, so
those links are not subject to network loops. Ports 1/0/6 - 1/0/8 are connected across
switches 1, 2 and 3.
Ports 1/0/1 - 1/0/5
Connected to Hosts
Ports 1/0/1 - 1/0/5
Connected to Hosts
Ports 1/0/1 - 1/0/5
Connected to Hosts
Ports 1/0/6 - 1/0/8
Connected to Switch 2 and 3
Ports 1/0/6 - 1/0/8
Connected to Switch 1 and 3
1/0/1 - 1/0/5 Switch 1
Root Bridge
Switch 2
Switch 3
Ports 1/0/6 - 1/0/8
Connected to
Switch 2 and
Perform the following procedures on each switch to configure MSTP:
1. Use the VLAN Configuration screen to create VLANs 300 and 500 (see VLAN
Configuration on page 120).
2. Use the VLAN Membership screen to include ports 1/0/1 - 1/0/8 as tagged (T) or untagged
(U) members of VLAN 300 and VLAN 500 (see VLAN Configuration on page 120).
3. From the STP Configuration screen, enable the Spanning Tree State option (see STP
Configuration on page 143).
Use the default values for the rest of the STP configuration settings. By default, the STP
Operation Mode is MSTP and the Configuration Name is the switch MAC address.
4. From the CST Configuration screen, set the Bridge Priority value for each of the three
switches to force Switch 1 to be the root bridge:
Switch 1: 4096
Switch 2: 12288
Switch 3: 20480
Note: Bridge priority values are multiples of 4096.
Page view 522

Comments to this Manuals

No comments