Netgear GS728TP User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Configuring System Information
35
ProSafe M5300 Switch
The device can poll Unicast server types for the server time.
Polling for Unicast information is used for polling a server for which the IP address is known.
SNTP servers that have been configured on the device are the only ones that are polled for
synchronization information. T1 through T4 are used to determine server time. This is the
preferred method for synchronizing device time because it is the most secure method. If this
method is selected, SNTP information is accepted only from SNTP servers defined on the
device using the SNTP Server Configuration page.
The device retrieves synchronization information, either by actively requesting information or
at every poll interval.
SNTP Global Configuration
Use the SNTP Global Configuration page to enable the SNTP client on the device and to
configure the SNTP client settings. Enabling and configuring the SNTP client allows the
device to synchronization the system time with a valid SNTP server on the network.
To display the SNTP Global Configuration page, click System
Management > Time SNTP
Global Configuration.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 529 530

Comments to this Manuals

No comments