Netgear GS728TP User Manual Page 238

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 237
Routing
238
ProSafe M5300 Switch
Stub Area Configuration
To display the Stub Area Configuration page, click Routing OSPF Advanced Stub Area
Configuration.
To configure an OSPF stub area:
1. Use Area ID to enter the OSPF area ID. An Area ID is a 32-bit integer in dotted decimal
format that uniquely identifies the area to which a router interface connects.
2. Use Import Summary LSAs to select enable or disable. If you select enable, summary
LSAs will be imported into stub areas.
3. Use Default Cost to enter the metric value you want applied for the default route advertised
into the stub area. Valid values range from 1 to 16,777,215.
4. Click ADD to configure the area as a stub area.
5. Click DELETE to delete the stub area designation. The area will be returned to normal state.
Field Description
SPF Runs The number of times that the intra-area route table has been calculated
using this area's link-state database. This is typically done using Dijkstra's
algorithm.
Area Border Router Count The total number of area border routers reachable within this area. This is
initially zero, and is calculated in each SPF Pass.
Area LSA Count The total number of link-state advertisements in this area's link-state
database, excluding AS External LSAs.
Area LSA Checksum The 32-bit unsigned sum of the link-state advertisements' LS checksums
contained in this area's link-state database. This sum excludes external (LS
type 5) link-state advertisements. The sum can be used to determine if
there has been a change in a router's link state database, and to compare
the link-state database of two routers.
Type of Service This field is the normal TOS associated with the stub metric.
Page view 237
1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 529 530

Comments to this Manuals

No comments