Netgear GS728TP User Manual Page 148

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 147
Configuring Switching Information
148
ProSafe M5300 Switch
CST Port Configuration
Use the Spanning Tree CST Port Configuration page to configure Common Spanning Tree
(CST) and Internal Spanning Tree on a specific port on the switch.
To display the Spanning Tree CST Port Configuration page, click Switching > STP >
Advanced
CST Port Configuration.
To configure CST port settings:
1. Interface - One of the physical or port channel interfaces associated with VLANs
associated with the CST.
2. Use Port Priority to specify the priority for a particular port within the CST. The port priority
is set in multiples of 16. For example if the priority is attempted to be set to any value
between 0 and 15, it will be set to 0. If it is tried to be set to any value between 16 and
(2*16-1) it will be set to 16 and so on.
3. Use Admin Edge Port to specify if the specified port is an Edge Port within the CIST. It
takes a value of TRUE or FALSE, where the default value is FALSE.
Page view 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 529 530

Comments to this Manuals

No comments