Netgear GS728TP User Manual download pdf (Page 14)

100

101

Getting Started

ProSafe M5300 Switch

Device View System LEDs

In addition to the port LEDs, the device view provides a representation of the system LEDs on

the left side of the front switch panel.

Power/Status LED

The power LED is a bicolor LED that serves as an indicator of power and diagnostic status.

The following indications are given by the following LED states:

• A solid green LED indicates that the power is supplied to the switch and operating

normally.

• A solid yellow LED indicates that system is in the boot-up stage.

• No lit LED indicates that power is disconnected.

FAN Status LED

FAN status is indicated as follows:

• A solid yellow LED indicates that the fan is faulty.

• No lit LED indicates that the fan is operating normally.

Stack Master LED

The Stack Master LED is lit if there is an active stack link and the unit is in stack mode.

• A solid green LED indicates that the switch acts as a master unit in a stack of switches.

• No lit LED indicates that the switch acts as a slave member in a stack of switches.

Module LEDs

Each switch includes two back-panel XAUI ports that support stacking or Ethernet modules.

For the M5300 Series-28G switches, the port numbers are 27 and 28. For M5300 Series-52G

switches, the port numbers are 51 and 52. If a back-panel module is present and active, the

LED is solid green.

Seven-Segment LED for the Stacking ID

A solid green LED displays the stack ID (1–6).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 14

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP