Netgear GS728TP User Manual download pdf (Page 455)

100

101

Managing Device Security

455

ProSafe M5300 Switch

VLAN Binding Table

Use this page to bind ACLs to VLANs on the switch rather than to ports. At the bottom of the

page, the table displays any currently-configured ACLs for the selected VLAN. You can also

bind an ACL to a port

To display the VLAN Binding Table, click Security

 ACL> Advanced  VLAN Binding Table.

The following table describes the information displayed in the ACL VLAN Binding Table.

1. In the VLAN ID field, specify the VLAN to which an IP will be bound.

2. Use Direction to specify the packet filtering direction for ACL. Valid directions are Inbound.

3. Use Sequence Number to specify the order of the specified ACL relative to other ACLs

assigned to selected interface and direction. A lower number indicates higher precedence

order. If a sequence number is already in use for this VLAN and direction, the specified

access list replaces the currently attached access list using that sequence number. If the

sequence number is not specified by the user (i.e. the value is 0), a sequence number that

is one greater than the highest sequence number currently in use for this VLAN and

direction will be used. Valid range is (1 to 4294967295).

4. Use ACL Type to specify the type of ACL. Valid ACL Types include IP ACL, MAC ACL, and

IPv6 ACL..

5. Use ACL ID to display all the ACLs configured, depending on the ACL Type selected.

6. Click APPLY to add the configured ACL-to-VLAN binding.

7. To delete a VLAN ACL-to-interface binding, select the check box next to the VLAN and

click DELETE.

1 2 ... 450 451 452 453 454 455 456 457 458 459 460 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 455

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP