Netgear GS728TP User Manual Page 382

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 381
Field Description
Character Size (bits) The number of bits in a character. This is always 8.
Flow Control Whether hardware flow control is enabled or disabled. It is always disabled.
Stop Bits The number of stop bits per character. Its is always 1.
Parity The parity method used on the serial port. It is always None.
Managing Device Security
382
ProSafe M5300 Switch
Denial of Service
Use this page to configure settings that help prevent Denial of Service (DoS) attacks against
the network. The switch provides support for classifying and blocking several types of DoS
attacks.
To display the Denial of Service page, click Security
Access > Denial of Service.
To configure protection from DoS attacks:
1. Use Denial of Service Min TCP Header Size to specify the minimum TCP header size
allowed. If First Fragment DoS prevention is enabled, the device will drop packets that
have a TCP header smaller than this configured value. First Fragment DoS prevention is
disabled by default.
2. Use Denial of Service ICMPv4 to enable ICMPv4 DoS prevention causing the switch to
drop ICMP packets that have a type set to ECHO_REQ (ping) and a size greater than the
configured ICMP Pkt Size. The factory default is disabled.
Page view 381
1 2 ... 377 378 379 380 381 382 383 384 385 386 387 ... 529 530

Comments to this Manuals

No comments