Netgear GS728TP User Manual Page 384

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 383
Managing Device Security
384
ProSafe M5300 Switch
Access Control
The Access Control feature allows you to configure settings that control management access
to the switch.. Access Control configure requires three steps:
1. Use the Access Profile Configuration page to create an access profile. To add rules to
the profile, the access profile must be deactivated, which is the default setting.
2. Use the Access Rule Configuration page to add one or more access rules to the profile.
3. Return to the Access Profile Configuration page to activate the profile.
The access profile is similar to an access control list (ACL) in that you can add multiple rules
to the profile that permit or deny access to the switch by protocols transmitted by specific IP
addresses.
From the Access Control link, you can access the following pages:
Access Profile Configuration on page 384
Access Rule Configuration on page 385
Access Profile Configuration
Use this page to create an access profile, control the administrative mode of the profile, and
view summary information about the profile.
To access the Access Profile Configuration page, click Security Access, and then click the
Access Control
Access Profile Configuration link.
In the following figure, a profile called administrators has been created, and one rule has
been added to the profile.
To create an Access Profile:
1. In the Access Profile Name field, specify the name of the access profile to be added.
The maximum length is 32 characters.
2. To activate an access profile, select the Activate Profile check box. You cannot add rules to
an active profile.
3. To deactivate an access profile, select the Deactivate Profile check box.
Page view 383
1 2 ... 379 380 381 382 383 384 385 386 387 388 389 ... 529 530

Comments to this Manuals

No comments