Netgear GS728TP User Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
Configuring System Information
57
ProSafe M5300 Switch
UDP Relay
The UDP Relay feature provides the ability for a router to forward configured UDP broadcast
packets to a particular IP address. This allows applications to reach servers on non-local
subnets. This is possible even when the application is designed to assume a server is always
on a local subnet or when the application uses broadcast packets to reach the server (with
the limited broadcast address 255.255.255.255, or a network directed broadcast address).
From the UDP Relay link, you can access the following pages:
UDP Relay Global Configuration on page 57
UDP Relay Interface Configuration on page 58
UDP Relay Global Configuration
To display the UDP Relay Global Configuration page, click System > Services > UDP Relay>
UDP Relay Global Configuration. A screen similar to the following displays.
To configure UDP relay:
1. Use Admin Mode to enable or disable the UDP Relay on the switch. The default value
is disable.
2. Use Server Address to specify the UDP Relay Server Address in x.x.x.x format.
3. Use UDP Port to specify the UDP Destination Port. These ports are supported:
DefaultSet - Relay UDP port 0 packets. This is specified if no UDP port is selected
when creating the Relay server.
dhcp -Relay DHCP (UDP port 67) packets.
domain - Relay DNS (UDP port 53) packets.
isakmp - Relay ISAKMP (UDP port 500) packets.
mobile-ip - Relay Mobile IP (UDP port 434) packets
nameserver - Relay IEN-116 Name Service (UDP port 42) packets
netbios-dgm - Relay NetBIOS Datagram Server (UDP port 138) packets
netbios-ns - Relay NetBIOS Name Server (UDP port 137) packets
ntp - Relay network time protocol (UDP port 123) packets.
pim-auto-rp - Relay PIM auto RP (UDP port 496) packets.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 529 530

Comments to this Manuals

No comments