Netgear GS728TP User Manual download pdf (Page 304)

100

101

Routing

304

ProSafe M5300 Switch

PIM

The Protocol Independent Multicast protocol is a simple, protocol-independent multicast

routing protocol. PIM uses an existing unicast routing table and a Join/Prune/Graft

mechanism to build a tree. PIM The ProSafe managed switch supports two types of PIM:

sparse mode (PIM-SM) and dense mode (PIM-DM).

PIM-SM is most effective in networks with a sparse population of multicast receivers. In

contrast, PIM-DM is most effective in networks with densely populated multicast receivers. In

other words, PIM-DM can be used if the majority of network hosts request to receive a

multicast stream, while PIM-SM might be a better choice in networks in which a small

percentage of network hosts, located throughout the network, wish to receive the multicast

stream.

From the PIM-DM link, you can access the following pages:

• PIM Global Configuration on page 304

• SSM Configuration on page 305

• PIM Interface Configuration on page 306

• PIM Neighbor on page 307

• Candidate RP Configuration on page 308

• BSR Candidate Configuration on page 309

• Static RP Configuration on page 310

PIM Global Configuration

To display the PIM Global Configuration page, click Routing Multicast PIM  Global

Configuration.

To configure global PIM settings:

1. Use PIM Protocol Type to select the PIM type to run:

• PIM-SM. Recommended for networks with sparsely-populated multicast receivers.

• PIM-SM. Recommended for networks with densely-populated multicast receivers.

2. Use Admin Mode to set the administrative status of PIM on the router. The default is

disable.

3. Click APPLY to update the switch with the new settings.

4. Click CANCEL to abandon the changes.

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 304

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP