Netgear GS728TP User Manual download pdf (Page 446)

100

101

Managing Device Security

446

ProSafe M5300 Switch

2. Configure the desired criteria for the new rule.

• Rule ID - Specify a number from 1–12 to identify the IP ACL rule. You can create up to

12 rules for each ACL.

• Action - Selects the ACL forwarding action, which is one of the following:

• Permit - Forwards packets which meet the ACL criteria.

• Deny - Drops packets which meet the ACL criteria.

• Logging - When set to 'Enable', logging is enabled for this ACL rule (subject to

resource availability in the device). If the Access List Trap Flag is also enabled, this

will cause periodic traps to be generated indicating the number of times this rule was

'hit' during the current report interval. A fixed 5 minute report interval is used for the

entire system. A trap is not issued if the ACL rule hit count is zero for the current

interval. This field is visible for a 'Deny' Action.

• Assign Queue - Specifies the hardware egress queue identifier used to handle all

packets matching this IP ACL rule. Valid range of Queue Ids is 0 to 6.

• Mirror Interface - Specifies the specific egress interface where the matching traffic

stream is copied in addition to being forwarded normally by the device. This field

cannot be set if a Redirect Interface is already configured for the ACL rule. This field

is visible for a 'Permit' Action.

• Match Every - Select true or false from the pull-down menu. True signifies that all

packets will match the selected IP ACL and Rule and will be either permitted or

denied. In this case, since all packets match the rule, the option of configuring other

match criteria will not be offered. To configure specific match criteria for the rule,

1 2 ... 441 442 443 444 445 446 447 448 449 450 451 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 446

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP