Netgear GS728TP User Manual download pdf (Page 255)

100

101

Routing

255

ProSafe M5300 Switch

Route Redistribution

This screen can be used to configure the OSPF Route Redistribution parameters. The

allowable values for each fields are displayed next to the field. If any invalid values are

entered, an alert message will be displayed with the list of all the valid values.

To display the Route Redistribution page, click Routing OSPF Advanced  Route

Redistribution.

To configure OSPF route redistribution:

1. Use Source to list available source routes that have not previously been configured for

redistribution by OSPF. The valid values are 'Static', 'Connected', and 'RIP'.

2. Use Redistribute Option to enable or disable the redistribution for the selected source

protocol.

3. Use Metric to set the metric value to be used as the metric of redistributed routes. This field

displays the metric if the source was pre-configured and can be modified. The valid values

are 0 to 16777214.

4. Use Metric Type to set the OSPF metric type of redistributed routes.

5. Use Tag to set the tag field in routes redistributed. This field displays the tag if the source

was pre-configured, otherwise 0 and can be modified. The valid values are 0 to

4294967295.

6. Use Subnets to set whether the subnetted routes should be redistributed.

7. Use Distribute List to set the Access List that filters the routes to be redistributed by the

destination protocol. Only permitted routes are redistributed. If this command refers to a

non-existent access list, all routes are permitted. The valid values for Access List IDs are 1

to 199.

When used for route filtering, the only fields in an access list that get used are:

• Source IP Address and netmask

• Destination IP Address and netmask

• Action (permit or deny)

All other fields (source and destination port, precedence, ToS, and so on) are ignored.

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 529 530

Comments to this Manuals

No comments

Netgear GS728TP User Manual Page 255

Comments to this Manuals

Related products and manuals for Software Netgear GS728TP