Netgear GS728TP User Manual Page 164

  • Download
  • Add to my manuals
  • Print
  • Page
    / 530
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 163
Configuring Switching Information
164
ProSafe M5300 Switch
IGMP Snooping Querier Configuration
Use this menu to configure the parameters for IGMP Snooping Querier. Note that only a user
with Read/Write access privileges may change the data on this screen.
To access this page, click Switching
Multicast IGMP Snooping Querier Configuration.
To configure IGMP Snooping Querier settings:
1. Use Querier Admin Mode to select the administrative mode for IGMP Snooping for the
switch. The default is disable.
2. Use Querier IP Address to specify the Snooping Querier Address to be used as source
address in periodic IGMP queries. This address is used when no address is configured on
the VLAN on which query is being sent.
3. Use IGMP Version to specify the IGMP protocol version used in periodic IGMP queries.
IGMP queries.
4. Use Query Interval(secs) to specify the time interval in seconds between periodic queries
sent by the snooping querier. The Query Interval must be a value in the range of 1 and
1800. The default value is 60.
5. Use Querier Expiry Interval(secs) to specify the time interval in seconds after which the
last querier information is removed. The Querier Expiry Interval must be a value in the range
of 60 and 300. The default value is 60.
Field Description
VLAN Ids Enabled For IGMP Snooping Querier Displays VLAN Ids enabled for IGMP snooping
querier.
Page view 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 529 530

Comments to this Manuals

No comments