Netgear GSM7228PS User Manual download pdf (Page 296)

100

101

Routing Commands

296

ProSafe Managed Switch

no external-lsdb-limit

This command configures the default external LSDB limit for OSPF.

Format no external-lsdb-limit

Mode

log-adjacency-changes

To enable logging of OSPFv2 neighbor state changes, use this command in router

configuration mode. State changes are logged with INFORMATIONAL severity.

Default

Format

log-adjacency-changes [detail]

Mode

no log-adjacency-changes

Use the no form of the command to disable state change logging.

Format

no log-adjacency-changes [detail]

Mode

ip ospf authentication

This command sets the OSPF Authentication Type and Key for the specified interface. The

value of <type> is either none, simple or encrypt. The <key> is composed of standard

displayable, non-control keystrokes from a Standard 101/102-key keyboard. The

authentication key must be 8 bytes or less if the authentication type is simple. If the type is

encrypt, the key may be up to 16 bytes. If the type is encrypt a <keyid> in the range of 0 and

255 must be specified. Unauthenticated interfaces do not need an authentication key or

authentication key ID. There is no default value for this command.

Format ip ospf authentication {none | {simple <key>} | {encrypt <key>

<keyid>}}

Mode

Router OSPF Config

Adjacency state changes are logged, but without the detail option.

OSPFv2 Router Configuration

Parameter Description

detail (Optional) When this keyword is specified, all adjacency state changes are logged. Otherwise,

OSPF only logs transitions to FULL state and when a backwards transition occurs.

OSPFv2 Router Configuration

Interface Config

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 296

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS