Netgear GSM7228PS User Manual Page 448

  • Download
  • Add to my manuals
  • Print
  • Page
    / 799
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 447
IPv6 Multicast Commands
448
ProSafe Managed Switch
no ipv6 pim rp-candidate
Use this command to disable the router to advertise itself as a PIM candidate rendezvous
point (RP) to the bootstrap router (BSR).
Format no ipv6 pim rp-candidate interface <unit/slot/port> <group-address>
<group-mask>
Mode
ipv6 pim ssm
Use this command to define the Source Specific Multicast (SSM) range of IP multicast
addresses.
Default
Format ipv6 pim ssm {default | <group-address/prefixlength> <group-mask>}
Mode
default
no ipv6 pim ssm
Use this command to disable the Source Specific Multicast (SSM) range.
Format no ipv6 pim ssm
Mode
show ipv6 pim bsr-router
Use command to display the bootstrap router (BSR) information. The output includes elected
BSR information and information about the locally configured candidate rendezvous point
(RP) advertisement.
Format show ipv6 pim bsr-router [candidate | elected]
Mode
• Privileged EXEC
• User EXEC
Global Config
disabled
Global Config
Parameter Description
Defines the SSM range access list to 232/8.
Global Config
Term Definition
BSR Address
IP address of the BSR.
Uptime
Length of time that this router has been up (in hours, minutes, and seconds).
BSR Priority
Priority as configured in the ip pim bsr-candidate command.
Page view 447
1 2 ... 443 444 445 446 447 448 449 450 451 452 453 ... 798 799

Comments to this Manuals

No comments