Netgear GSM7228PS User Manual download pdf (Page 689)

100

101

Management Commands

689

ProSafe Managed Switch

Note: The <name> parameter does not need to be unique, however; the

<name> and <ipaddr | hostname> pair must be unique. Multiple

entries can exist with the same <name>, as long as they are

associated with a different <ipaddr | hostname>. The reverse

scenario is also acceptable. The <name> is the community name

used when sending the trap to the receiver, but the <name> is not

directly associated with the SNMP Community Table, See

“snmp-server community” on page39.”

no snmptrap

Use this command to delete trap receivers for a community.

Format no snmptrap <name> {ipaddr <ipaddr|hostname> | ip6addr <ip6addr|

hostname>}

Mode

snmptrap snmpversion

Use this command to modify the SNMP version of a trap. The maximum length of <name> is

16 case-sensitive alphanumeric characters. The <snmpversion> parameter options are

snmpv1 or snmpv2.

Note: This command does not support a “no” form.

Default

snmpv2

Format snmptrap <name> {ipaddr <ipaddr|hostname> | ip6addr <ip6addr|

hostname>} [snmpversion <snmpversion>]

Mode

Global Config

Default

snmpv2

Format snmptrap snmpversion <name> {<ipaddr | hostname> |<ip6addr|hostname>}

{snmpv1|snmpv2}

Mode

Global Config

1 2 ... 684 685 686 687 688 689 690 691 692 693 694 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 689

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS