Netgear GSM7228PS User Manual Page 280

  • Download
  • Add to my manuals
  • Print
  • Page
    / 799
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 279
Routing Commands
280
ProSafe Managed Switch
on the routing interface to form the helper addresses list until the list reaches the maximum
supported helper addresses.
Format ip helper-address <ip-address>
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode
no ip helper-address
Use this command to remove the IP address from the previously configured list. The no
command without an <
ip-address> argument removes the entire list of helper addresses
on that interface.
Format no ip helper-address {<ip-address>}
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode
ip helper-address discard
Use this command to drop matching packets.
Format ip helper-address discard
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode
no ip helper-address discard
Use this command to permit the matching packets.
Format no ip helper-address discard
{<1-65535>|dhcp|domain|isakmp|mobile-ip|nameserver|
netbios-dgm|netbios-ns|ntp|pim-auto-rip|rip|tacacs|tftp|time}
Mode
show ip helper-address
Use this command to display the configured helper addresses on the given interface.
Format show ip helper-address <interface>
Mode
• Privileged EXEC
• User EXEC
The following shows example CLI display output for the command.
(switch) #show ip helper-address 1/0/1
Interface Config
Interface Config
Interface Config
Interface Config
Page view 279
1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 798 799

Comments to this Manuals

No comments