Netgear GSM7228PS User Manual download pdf (Page 478)

100

101

Quality of Service (QoS) Commands

478

ProSafe Managed Switch

match srcl4port

This command adds to the specified class definition a match condition based on the source

layer 4 port of a packet using a single keyword or numeric notation. To specify the match

condition as a single keyword notation, the value for <portkey> is one of the supported port

name keywords (listed below). The currently supported <portkey> values are: domain,

echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these translates into its

equivalent port number, which is used as both the start and end of a port range.

To specify the match condition as a numeric value, one layer 4 port number is required. The

port number is an integer from 0 to 65535.

Default

Format match srcl4port {<portkey> | <0-65535>}

Mode

match vlan

This command adds to the specified class definition a match condition based on the value of

the layer 2 VLAN Identifier field (the 802.1Q tag of a VLAN tagged packet). The VLAN is an

integer from 0 to 4095.

Default

Format match vlan {<0-4095>}

Mode

match secondary-vlan

This command adds to the specified class definition a match condition based on the value of

the layer 2 secondary VLAN Identifier field (the 802.1Q tag of a double VLAN tagged packet).

The VLAN is an integer from 0 to 4095.

Default

Format match secondary-vlan {<0-4095>}

Mode

Format match srcip6 <source-ipv6-prefix/prefix-length>

Mode

Ipv6-Class-Map Config

none

Class-Map Config

Ipv6-Class-Map Config

none

Class-Map Config

Ipv6-Class-Map Config

none

Class-Map Config

Ipv6-Class-Map Config

1 2 ... 473 474 475 476 477 478 479 480 481 482 483 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 478

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS