Netgear GSM7228PS User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 799
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
Switching Commands
46
ProSafe Managed Switch
no interface loopback
This command removes the loopback interface and associated configuration parameters for
the specified loopback interface.
Format no interface loopback <loopback-id>
Mode
show interface loopback
This command displays information about configured loopback interfaces.
Format show interface loopback [<loopback-id>]
Mode
If you do not specify a loopback ID, the following information appears for each loopback
interface on the system:
Loopback ID
Interface
IP Address
Received
Packets
Sent Packets
IPv6 Address
If you specify a loopback ID, the following information appears:
Interface Link
Status
IP Address
IPv6 is enabled
(disabled)
IPv6 Prefix is
MTU size
Global Config
Privileged EXEC
Term Definition
The loopback ID associated with the rest of the information in the row.
The interface name.
The IPv4 address of the interface.
The number of packets received on this interface.
The number of packets transmitted from this interface.
The IPv6 address of this interface.
Term Definition
Shows whether the link is up or down.
The IPv4 address of the interface.
Shows whether IPv6 is enabled on the interface.
The IPv6 address of the interface.
The maximum transmission size for packets on this interface, in bytes.
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 798 799

Comments to this Manuals

No comments