Netgear CM212 User Manual

8. When the following dialog box appears, click Yes.9. Restart the computer.10. Proceed to Chapter 4 – Test the Connection on page 11.Ethernet Connect

Windows 98 or Me1. Choose Settings>Control Panel from the Start menu.2. Double-click the Network icon.3. Click the Configuration tab.4. In the list

Macintosh Operating SystemMac OS®8.6 or 9.x1. Choose Control Panels > TCP/IP from theApple () menu.2. Choose User Mode from the Edit menu.3. Click

Test the ConnectionTo test your setup, you view a Web page online.1. Start your Internet browser on the computer 2. Go to NETGEAR’s Web site (www.NETG

Sharing Your Cable Internet with Multiple ComputersCombining a Cable/DSL router with your Cable Modem enables you to connect multiplecomputers so they

TroubleshootingNo lights are lit on the modemThe modem has no power.• Make sure the power adapter is properly connected to the modem.• Make sure the p

For Windows, the Network Properties should have Obtain an IP address automatically selected(see page 9). For Macintosh computers, the TCP/IP (or Netwo

Glossary of TermsCategory 5 (CAT5): A twisted pair cable that meets specified requirements for high-speed networking. Community Antenna Television (CA

Voluntary Control Council for Interference (VCCI) StatementThis equipment is in the second category (information equipment to be used in residential a

Technical SupportPLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITHYOUR PRODUCT. By registering your product at www.NETGEAR.com/register,

IntroductionThank you for purchasing a NETGEAR CM212 Cable Modem. With this modem you canhave secure high-speed Internet access and, if you have an Ca

What’s in the BoxWhen you open the box, verify that you received everything. The package includes:• NETGEAR CM212 Cable Modem• AC power adapter • Vert

Prepare for InstallationBefore installing the CM212 cable modem, you should have active (two-way) cableservice and an Internet account with your cable

Install the Cable ModemAfter unpacking the box, you can install the cable modem. You do not have to powerdown any equipment to do this, but if you nee

Ethernet ConnectionUse the Ethernet cable if you’re connecting the modem to one or more computers and youhave an available RJ-45 port on your computer

Configure the Computer to Work withthe ModemNext, you configure the computer to interact with the modem. USB ConnectionNote: The modem must be connect

4. Select “Search for suitable drivers for my device” and click Next5. Select CD-ROM Drives and click Next.7

6. Click Next when the following dialog box appears.7. Click Finish.8