Netgear GSM7228PS User Manual download pdf (Page 493)

100

101

Quality of Service (QoS) Commands

493

ProSafe Managed Switch

VLAN, then the ACL rule is applied immediately. If a time range withspecified name exists

and the MAC ACL containing this ACL rule is applied to aninterface or bound to a VLAN, then

the ACL rule is applied when the time-range withspecified name becomes active. The ACL

rule is removed when the time-range withspecified name becomes inactive.

The vlan and cos parameters refer to the VLAN identifier and 802.1p user priority fields,

respectively, of the VLAN tag. For packets containing a double VLAN tag, this is the first (or

outer) tag.

The assign-queue parameter allows specification of a particular hardware queue for handling

traffic that matches this rule. The allowed <queue-id> value is 0-(n-1), where n is the

number of user configurable queues available for the hardware platform. The

assign-queue parameter is valid only for a permit rule.

Note: The special command form {deny | permit} any any is used to match

all Ethernet layer 2 packets, and is the equivalent of the IP access

list “match every” rule.

Ethertype Keyword Corresponding Value

appletalk 0x809B

arp 0x0806

ibmsna 0x80D5

ipv4 0x0800

ipv6 0x86DD

ipx 0x8037

mplsmcast 0x8848

mplsucast 0x8847

netbios 0x8191

novell 0x8137, 0x8138

pppoe 0x8863, 0x8864

rarp 0x8035

Format {deny|permit} {<srcmac> | any} {<dstmac> | any} [<ethertypekey> |

<0x0600-0xFFFF>] [vlan {eq <0-4095>}] [cos <0-7>] [[log] [time-range

<time-range-name>][assign-queue <queue-id>]] [{mirror | redirect}

<unit/slot/port>]

Mode

Mac-Access-List Config

1 2 ... 488 489 490 491 492 493 494 495 496 497 498 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 493

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS