Netgear GSM7228PS User Manual download pdf (Page 641)

100

101

Management Commands

641

ProSafe Managed Switch

IPv6 Address/Length is ........................ 3099::210:18FF:FE82:337/64

IPv6 Default Router is ........................ FE80::204:76FF:FE73:423A

Burned In MAC Address.......................... 00:10:18:82:03:37

Locally Administered MAC Address............... 00:00:00:00:00:00

MAC Address Type............................... Burned In

Network Configuration Protocol Current......... None

Management VLAN ID............................. 1

Web Mode....................................... Enable

Java Mode...................................... Enable

Console Port Access Commands

This section describes the commands you use to configure the console port. You can use a

serial cable to connect a management host directly to the console port of the switch.

configuration

Use this command to access Global Config mode. From Global Config mode, you can

configure a variety of system settings, including user accounts. You can also enter other

command modes, including Line Config mode.

Format configuration

Mode

line

Use this command to access Line Config mode, which allows you to configure various Telnet

settings, ssh settings, and the console port.

Format line {console | telnet | ssh}

Mode

serial baudrate

Use this command to specify the communication rate of the terminal interface. The supported

rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.

Default

Format serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 |

115200}

Mode

Privileged EXEC

Global Config

115200

Line Config

1 2 ... 636 637 638 639 640 641 642 643 644 645 646 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 641

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS