Netgear GSM7228PS User Manual download pdf (Page 561)

100

101

Utility Commands

561

ProSafe Managed Switch

security

Use this command to set the email alerting security protocol by enabling the switch to use

TLS authentication with the SMTP Server. If the TLS mode is enabled on the switch but the

SMTP sever does not support TLS mode, no email is sent to the SMTP server.

Default

Format security {tlsv1 | none}

Mode

port

Use this command to configure the TCP port to use for communication with the SMTP server.

The recommended port for TLSv1 is 465, and for no security (i.e. none) it is 25. However, any

nonstandard port in the range 1 to 65535 is also allowed.

Default

Format port {465 | 25 | 1–65535}

Mode

username

Use this command to configure the login ID that the switch uses to authenticate with the

SMTP server.

Default

Format username name

Mode

password

Use this command to configure the password that the switch uses to authenticate with the

SMTP server.

Format password password

Mode

show mail-server config

Use this command to display information about the email alert configuration.

Format show mail-server {ip-address | hostname | all } config

Mode

none

Mail Server Config

admin

Mail Server Config

Privileged EXEC

1 2 ... 556 557 558 559 560 561 562 563 564 565 566 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 561

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS