Netgear GSM7228PS User Manual download pdf (Page 16)

100

101

Using the Command-Line Interface

ProSafe Managed Switch

Table 6 explains how to enter or exit each mode.

Table 6. CLI Mode Access and Exit

Command Mode Access Method Exit or Access Previous Mode

User EXEC This is the first level of access. To exit, enter logout.

Privileged EXEC From the User EXEC mode, enter

enable.

To exit to the User EXEC mode, enter exit or

press Ctrl-Z.

Global Config From the Privileged EXEC mode,

enter configure.

To exit to the Privileged EXEC mode, enter exit,

or press Ctrl-Z.

VLAN Config From the Privileged EXEC mode,

enter vlan database.

To exit to the Privileged EXEC mode, enter exit,

or press Ctrl-Z.

Interface Config From the Global Config mode,

enter

interface <unit/slot/port>

or interface loopback <id>

or interface tunnel <id>

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Line Config From the Global Config mode,

enter

lineconfig.

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Policy-Map

Config

From the Global Config mode,

enter

policy-map <name> in.

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Policy-Class-Map

Config

From the Policy Map mode enter

class.

To exit to the Policy Map mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Class-Map

Config

From the Global Config mode,

enter

class-map, and specify the

optional keyword ipv4 to specify

the Layer 3 protocol for this class.

See class-map on page 470 for

more information.

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Ipv6-Class-Map

Config

From the Global Config mode,

enter

class-map and specify the

optional keyword ipv6 to specify

the Layer 3 protocol for this class.

See class-map on page 470 for

more information.

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Router OSPF

Config

From the Global Config mode,

enter

router ospf.

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

Router OSPFv3

Config

From the Global Config mode,

enter

ipv6 router ospf.

To exit to the Global Config mode, enter exit. To

return to the Privileged EXEC mode, enter

Ctrl-Z.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 16

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS