Netgear GSM7228PS User Manual download pdf (Page 519)

Power over Ethernet (PoE) Commands

ProSafe Managed Switch

PoE Commands

Use this command to enable the Power over Ethernet (PoE) functionality on a global basis or per

Use this command to disable the Power over Ethernet (PoE) functionality on a global basis or per

poe detection

Use this command to configure the detection type on a global basis or per interface. It is used to

configure which types of PDs will be detected and powered by the switch. There are three

• ieee—Detect resistive-type devices (IEEE standard)

• pre-ieee—Legacy capacitive detection only (non-standard)

• auto—Perform resistive detection first (IEEE standard), and then capacitive detection

(pre-IEEE standard)

Mode Global Config

Interface Config

Default enabled

Format no poe

Mode Global Config

Interface Config

Format poe detection { ieee | pre-ieee | auto}

Mode Global Config

Interface Config

Default auto

Netgear GSM7228PS User Manual Page 519