Netgear GSM7228PS User Manual download pdf (Page 101)

100

101

Switching Commands

101

ProSafe Managed Switch

dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state

machine on this port. Depending on the token used and the value (in seconds) passed,

various timeout configurable parameters are set. The following tokens are supported:

guest-vlan-period

reauth-period

quiet-period

tx-period

supp-timeout

server-timeout

Default

• guest-vlan-period: 90 seconds

• reauth-period: 3600 seconds

• quiet-period: 60 seconds

• tx-period: 30 seconds

• supp-timeout: 30 seconds

• server-timeout: 30 seconds

Format dot1x timeout {{guest-vlan-period <seconds>} |{reauth-period

<seconds>} | {quiet-period <seconds>} | {tx-period <seconds>} |

{supp-timeout <seconds>} | {server-timeout <seconds>}}

Mode

no dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state

machine on this port to the default values. Depending on the token used, the corresponding

default values are set.

Format no dot1x timeout {guest-vlan-period | reauth-period | quiet-period |

tx-period | supp-timeout | server-timeout}

Mode

Tokens Definition

The time, in seconds, for which the authenticator waits to see if any EAPOL packets are

received on a port before authorizing the port and placing the port in the guest vlan (if

configured). The guest vlan timer is only relevant when guest vlan has been configured

on that specific port.