Netgear GSM7228PS User Manual Page 136

  • Download
  • Add to my manuals
  • Print
  • Page
    / 799
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 135
1
2
3
4
5
6
7
<unit/slot/port>| all
Switching Commands
136
ProSafe Managed Switch
no port-channel load-balance
This command reverts to the default load balancing configuration.
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical
unit/slot/port for a configured port-channel, and <name> is an alphanumeric string up to 15
characters.
Format port-channel name {<logical unit/slot/port> | <name>}
Mode
Term Definition
Source MAC, VLAN, EtherType, and incoming port associated with the packet
Destination MAC, VLAN, EtherType, and incoming port associated with the packet
Source/Destination MAC, VLAN, EtherType, and incoming port associated with the
packet
Source IP and Source TCP/UDP fields of the packet
Destination IP and Destination TCP/UDP Port fields of the packet
Source/Destination IP and source/destination TCP/UDP Port fields of the packet
Enhanced Hashing Mode
Global Config Mode only: The interface is a logical unit/slot/port number of a
configured port-channel. "All" applies the command to all currently configured
port-channels.
Format no port-channel load-balance {<unit/slot/port> | <all>}
Mode
Interface Config
Global Config
Term Definition
<unit/slot/port>| all
Global Config Mode only: The interface is a logical unit/slot/port number of a
configured port-channel. "All" applies the command to all currently configured
port-channels.
Global Config
Page view 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 798 799

Comments to this Manuals

No comments