Netgear GSM7228PS User Manual Page 646

  • Download
  • Add to my manuals
  • Print
  • Page
    / 799
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 645
Management Commands
646
ProSafe Managed Switch
no session-limit
Use this command to set the maximum number of simultaneous outbound Telnet sessions to
the default value.
Format no session-limit
Mode
session-timeout
Use this command to set the Telnet session timeout value.The timeout value unit of time is
minutes.
Default
Format session-timeout <1-160>
Mode
no session-timeout
Use this command to set the Telnet session timeout value to the default. The timeout value
unit of time is minutes.
Format no session-timeout
Mode
telnetcon maxsessions
Use this command to specify the maximum number of Telnet connection sessions that can be
established. A value of 0 indicates that no Telnet connection can be established. The range is
0-5.
Default
Format telnetcon maxsessions <0-4>
Mode
no telnetcon maxsessions
Use this command to set the maximum number of Telnet connection sessions that can be
established to the default value.
Format no telnetcon maxsessions
Mode
Line Config
5
Line Config
Line Config
4
Privileged EXEC
Privileged EXEC
Page view 645
1 2 ... 641 642 643 644 645 646 647 648 649 650 651 ... 798 799

Comments to this Manuals

No comments