Netgear GSM7228PS User Manual download pdf (Page 545)

100

101

Utility Commands

545

ProSafe Managed Switch

The following information displays if you enter the count parameter:

Dynamic

Address count

Static Address

(User-defined)

count

Total MAC

Addresses in

use

Total MAC

Addresses

available

process cpu threshold

Use this command to configure the CPU utilization thresholds. The Rising and Falling

thresholds are specified as a percentage of CPU resources. The utilization monitoring time

period can be configured from 5 seconds to 86400 seconds in multiples of 5 seconds. The

CPU utilization threshold configuration is saved across a switch reboot. Configuring the

falling utilization threshold is optional. If the falling CPU utilization parameters are not

configured, then they take the same value as the rising CPU utilization parameters.

Format

process cpu threshold type total rising <1-100> interval

<5-86400> {rising <1-100> interval <5-86400>}

Mode

show process cpu

This command provides the percentage utilization of the CPU by different tasks.

Term Definition

Number of MAC addresses in the forwarding database that were automatically learned.

Number of MAC addresses in the forwarding database that were manually entered by a

user.

Number of MAC addresses currently in the forwarding database.

Number of MAC addresses the forwarding database can handle.

Global Config

Parameter Description

rising threshold The percentage of CPU resources that, when exceeded for the configured rising interval,

triggers a notification. The range is 1 to 100. The default is 0 (disabled).

rising interval The duration of the CPU rising threshold violation, in seconds, that must be met to trigger a

notification. The range is 5 to 86400. The default is 0 (disabled).

falling threshold The percentage of CPU resources that, when usage falls below this level for the configured

interval, triggers a notification. The range is 1 to 100. The default is 0 (disabled). A notification

is triggered when the total CPU utilization falls below this level for a configured period of time.

The falling utilization threshold notification is made only if a rising threshold notification was

previously done. The falling utilization threshold must always be equal or less than the rising

threshold value. The CLI does not allow setting the falling threshold to be greater than the

rising threshold.

falling interval The duration of the CPU falling threshold, in seconds, that must be met to trigger a

notification. The range is 5 to 86400. The default is 0 (disabled).

1 2 ... 540 541 542 543 544 545 546 547 548 549 550 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 545

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS