Netgear GSM7228PS User Manual Page 472

  • Download
  • Add to my manuals
  • Print
  • Page
    / 799
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 471
Quality of Service (QoS) Commands
472
ProSafe Managed Switch
match ethertype
This command adds to the specified class definition a match condition based on the value of
the ethertype. The <ethertype> value is specified as one of the following keywords:
appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios,
novell, pppoe, rarp or as a custom ethertype value in the range of 0x0600-0xFFFF.
Format match ethertype {<keyword> | custom <0x0600-0xFFFF>}
Mode
match any
This command adds to the specified class definition a match condition whereby all packets
are considered to belong to the class.
Default
Format match any
Mode
match class-map
This command adds to the specified class definition the set of match conditions defined for
another class. The <refclassname> is the name of an existing DiffServ class whose match
conditions are being referenced by the specified class definition.
Default none
Format match class-map <refclassname>
Mode
Note the following:
The parameters <refclassname> and <class-map-name> can not be the same.
Only one other class may be referenced by a class.
Any attempts to delete the <refclassname> class while the class is still referenced by any
<class-map-name> fails.
The combined match criteria of <class-map-name> and <refclassname> must be an
allowed combination based on the class type.
Any subsequent changes to the <refclassname> class match criteria must maintain this
validity, or the change attempt fails.
The total number of class rules formed by the complete reference class chain (including
both predecessor and successor classes) must not exceed a platform-specific maximum.
Class-Map Config
Ipv6-Class-Map Config
none
Class-Map Config
Ipv6-Class-Map Config
Class-Map Config
Ipv6-Class-Map Config
Page view 471
1 2 ... 467 468 469 470 471 472 473 474 475 476 477 ... 798 799

Comments to this Manuals

No comments