Netgear GSM7228PS User Manual download pdf (Page 33)

100

101

Stacking Commands

ProSafe Managed Switch

Example:

(Switch)#show nsf

Administrative Status.......................... Enable

Operational Status............................. Enable

Last Startup Reason............................ Warm Auto-Restart

Time Since Last Restart........................ 0 days 16 hrs 52 mins 55 secs

Restart In Progress............................ No

Warm Restart Ready............................. Yes

Copy of Running Configuration to Backup Unit:

Status...................................... Stale

Time Since Last Copy........................ 0 days 4 hrs 53 mins 22 secs

Time Until Next Copy........................ 28 seconds

Unit NSF Support

---- -----------

1 Yes

2 Yes

3 Yes

initiate failover

Use this command to force the backup unit to take over as the management unit and perform

a “warm restart” of the stack. On a warm restart, the backup unit becomes the management

unit without clearing its hardware tables (on a cold restart, hardware tables are cleared).

Applications apply checkpointed data from the former management unit. The original

management unit reboots. If the system is not ready for a warm restart, for example because

no backup unit has been elected or one or more members of the stack do not support

nonstop forwarding, the command fails with a warning message. The movemanagement

command also transfers control from the current management unit; however, the hardware is

cleared and all units reinitialize.

Note: Use this command instead of movemanagement if you expect nsf

during management unit changes.

Time Since Last Copy When the running configuration was last copied from the management unit to the

backup unit.

Time Until Next Copy The number of seconds until the running configuration will be copied to the backup

unit. This line only appears when the running configuration on the backup unit is

Stale.

NSF Support (Per Unit

Status Parameters)

Whether a unit supports NSF.

Format initiate failover

Mode Stack Global Config Mode

Term Definition

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 33

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS