Netgear GSM7228PS User Manual download pdf (Page 288)

100

101

Routing Commands

288

ProSafe Managed Switch

area stub no-summary (OSPF)

This command configures the Summary LSA mode for the stub area identified by <areaid>.

Use this command to prevent LSA Summaries from being sent.

Default

Format area <areaid> stub no-summary

Mode

no area stub no-summary

This command configures the default Summary LSA mode for the stub area identified by

<areaid>.

Format no area <areaid> stub no-summary

Mode

area virtual-link (OSPF)

This command creates the OSPF virtual interface for the specified <areaid> and

<neighbor>. The <neighbor> parameter is the Router ID of the neighbor.

Format area <areaid> virtual-link <neighbor>

Mode

no area virtual-link

This command deletes the OSPF virtual interface from the given interface, identified by

<areaid> and <neighbor>. The <neighbor> parameter is the Router ID of the neighbor.

Format no area <areaid> virtual-link <neighbor>

Mode

area virtual-link authentication

This command configures the authentication type and key for the OSPF virtual interface

identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of

the neighbor. The value for <type> is either none, simple, or encrypt. The [key] is

composed of standard displayable, non-control keystrokes from a Standard 101/102-key

keyboard. The authentication key must be 8 bytes or less if the authentication type is simple.

If the type is encrypt, the key may be up to 16 bytes. Unauthenticated interfaces do not need

an authentication key. If the type is encrypt, a key id in the range of 0 and 255 must be

disabled

Router OSPF Config

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 288

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS