Netgear GSM7228PS User Manual download pdf (Page 272)

100

101

Routing Commands

272

ProSafe Managed Switch

no ip vrrp track interface

Use this command to remove the interface from the tracked list or to restore the priority

decrement to its default.

Format no ip vrrp <vrid> track interface <unit/slot/port> [decrement]

Mode

ip vrrp track ip route

Use this command to track the route reachability. When the tracked route is deleted, the

priority of the VRRP router will be decremented by the value specified in the <priority>

argument. When the tracked route is added, the priority will be incremented by the same.

A VRRP configured interface can track more than one route. When a tracked route goes

down, then the priority of the router will be decreased by 10 (the default priority decrement)

for each downed route. By default no routes are tracked. If you specify just the route to be

tracked, without giving the optional priority, then the default priority will be set. The default

priority decrement is 10. The default priority decrement is changed using the <priority>

argument.

Default

Format ip vrrp <vrid> track ip route <ip-address/prefix-length> [decrement

<priority>]

Mode

no ip vrrp track ip route

Use this command to remove the route from the tracked list or to restore the priority

decrement to its default. When removing a tracked IP route from the tracked list, the priority

should be incremented by the decrement value if the route is not reachable.

Format no ip vrrp <vrid> track ip route <ip-address/prefix-length>

[decrement]

Mode

ip vrrp <vrid> accept-mode

This command is used to allow a router to respond to ICMP Echo Requests sent to an

address on a VRRP virtual router. VRRP supports responding to pings, but does not allow the

VRRP Master to accept other types of packets. A new configuration option controls whether

the router responds to Echo Requests sent to a VRRP IP address.

The VRRP Master responds to both fragmented and un-fragmented ICMP Echo Request

packets. The VRRP Master responds to Echo Requests sent to the virtual router's primary

address or any of its secondary addresses.

Interface Config

priority: 10

Interface Config

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 272

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS