Netgear GSM7228PS User Manual download pdf (Page 269)

100

101

Routing Commands

269

ProSafe Managed Switch

ip vrrp ip

This command sets the virtual router IP address value for an interface. The value for

<ipaddr> is the IP address which is to be configured on that interface for VRRP. The

parameter <vrid> is the virtual router ID which has an integer value range from 1 to 255.

You can use the optional [secondary] parameter to designate the IP address as a

secondary IP address.

Default

Format ip vrrp <vrid> ip <ipaddr> [secondary]

Mode

no ip vrrp ip

Use this command in Interface Config mode to delete a secondary IP address value from the

interface. To delete the primary IP address, you must delete the virtual router on the

interface.

Format no ip vrrp <vrid> <ipaddress> secondary

Mode

ip vrrp authentication

This command sets the authorization details value for the virtual router configured on a

specified interface. The parameter {none | simple} specifies the authorization type for

virtual router configured on the specified interface. The parameter [key] is optional, it is only

required when authorization type is simple text password. The parameter <vrid> is the

virtual router ID which has an integer value ranges from 1 to 255.

Default

Format ip vrrp <vrid> authentication {none | simple <key>}

Mode

no ip vrrp authentication

This command sets the default authorization details value for the virtual router configured on

a specified interface.

Format no ip vrrp <vrid> authentication

Mode

none

Interface Config

no authorization

Interface Config

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 798 799

Comments to this Manuals

No comments

Netgear GSM7228PS User Manual Page 269

Comments to this Manuals

Related products and manuals for Networking Netgear GSM7228PS